Reolink RLC-410Source: Rich Edmonds / Windows Central

It’s easy to configure a Reolink security camera to get it working on a QNAP network-attached storage (NAS) enclosure. With enough IP camera licenses available on your server, it’s even possible to set up a Surveillance Station in but a few minutes. In this guide, I’ll run you through the quick and painless process of adding Reolink cameras to your QNAP NAS.

Products used in this guide

How to connect your Reolink camera to QNAP NAS

  1. Turn on your QNAP NAS.
  2. Make sure you’ve already connected your Reolink camera to your home network, and it’s installed and ready for use.
  3. Launch your favorite browser on a PC to log into your QNAP NAS. (This is usually the IP address followed by port 80, e.g.: 192.168.1.15:80.)
  4. Open App Center.
  5. Install Surveillance Station.
  6. Launch Surveillance Station.
  7. Enter Settings.
  8. Click on the + on Camera 1.

    QNAP Surveillance Station

    Source: QNAP

  9. Enter all the details for the Reolink camera you’re attempting to connect to.
  10. Hit Test to make sure it works.
  11. Click Next.
  12. You can now configure quality and recording settings or leave them default.
  13. Click Next.
  14. Here, we can set up schedules and more.
  15. Once finished, click Next.
  16. Confirm all the details and click Next to complete the process.

You’ll now be able to control, manage, and set all kinds of settings for the newly added Reolink camera within the Surveillance Station. This software suite is expansive, allowing you to set up recordings, schedules, and more.

Our top equipment picks





READ SOURCE

READ  NVIDIA's A6000 and A40 help professionals get work done wherever they are

LEAVE A REPLY

Please enter your comment!
Please enter your name here